|
Mastering VMware® Infrastructure3One adapter must be able to communicate on the production network, and the second adapter is configured for internal cluster heartbeat communication. 15. Power on the first node of the cluster, and assign valid IP addresses to the network adapters configured for the production and heartbeat networks. Then format the additional drives and assign drive letters, as shown in Figure 10.12. 16. Shut down the first cluster node. 17. In the VirtualCenter inventory, select the ESX Server host where the first cluster node is configured and then select the Configuration tab. 18. Select Advanced Settings from the Software menu. Figure 10.12 The RDMs presented to the first cluster node are formatted and assigned drive letters. 19.PIn the Advanced Settings dialog box, configure the following options, as shown in Figure 10.13: Set the Disk.ResetOnFailure option to 1. Set the Disk.UseLunReset option to 1. Set the Disk.UseDeviceReset option to 0. Figure 10.13 ESX Server hosts with virtual machines configured as cluster nodes require changes to be made to several advanced disk configuration settings. 20.PProceed to the next section to configure the second cluster node and the respective ESX Server host ...» |
Код для вставки книги в блог HTML
phpBB
текст
|
|